top of page
syringe.png

Pioneer Clear Five Epoxy Syringe

Dries clear in 5 minutes. Easy to use. No measurement required.
Description

​Pioneer Clear Five Epoxy Syringe is a thermosetting type of adhesive that cures in 5 minutes. It dries clear, producing an invisible glue line. It develops strength even at temperatures as low as 0°F. It adheres to almost all surfaces. It is ideal for fast perfect bonding and repair of glass, concrete, steel, wood, marble, stone, enamel, some plastics and porcelain. It combines the high quality strength of epoxy adhesives with an extra fast setting characteristics of a contact adhesive. No jigs and no clamps support needed while setting.

​

Packaging

​​6ml tube

​​

​​Applications

  • Bonds parts and accessories for DIY projects

  • For general home repairs

  • For mending of broken china and pottery

  • For bonding porcelain or metal designs to wood, marble and concrete

  • For repair of glass, concrete, steel, enamel and some plastics

Available in stores and online
lzda
shpe
tktk

WATCH

Directions for use

A. Surface Preparation 

Surface contaminants such as dirt, grease, oil or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.

​

B. Method

  1. Cut-off syringe tip (cap).

  2. Slowly press down the plunger to dispense equal parts by volume of resin and hardener.

  3. Mix until color streaks disappear and uniform color is achieved. To avoid waste, prepare a quantity just enough to be consumed within 3 minutes.

  4. Apply epoxy on surfaces to be bonded using a spatula. Join surfaces with sufficient pressure to ensure complete contact. Unnecessary handling should be avoided until cure is complete. On its uncured state, scrape off excess from edges or joints or immediately spread out the mixture on surfaces to be settled, filled or patched.

  5. Use supplied cap to re-seal and store.

​

C. Cleaning

Clean all tools or equipment used while adhesive is still in its uncured state. Use Pioneer Epoxy Reducer or solvents to clean tools and spills.

bottom of page