Pioneer
All Purpose Epoxy
All Purpose Structural Adhesive
Description
​Pioneer All Purpose Epoxy is a 100% solids thermosetting plastic compound that forms strong bonds on a wide variety of rigid materials– glass, metals, ceramics, concrete, wood and some plastics (except polyethylene, soft PVC and Teflon).
​
Packaging
35g tube set, 1/4 pint set, 1/2 pint set, pint set, quart set, gallon set​​
​
​​Applications:
-
Bonding, patching, Filling and sealing of new or worn-out boat, furniture, porcelain, metal or concrete
-
Bonding decorative and metal hardware to wood, metal and concrete
-
Installing ceramics or glass tiles to wooden or concrete surfaces
-
Adhesive for metal nameplates in automotive and appliances industry
-
Repairing or joining marble blocks to marble, wood or concrete
WATCH: How to use Pioneer All Purpose Epoxy
Directions for use
A. Surface Preparation
Surface contaminants such as dirt, grease, oil or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.
B. Mixing
Mix equal parts by volume of components A and B. Better to use separate spatulas (or spoon) to avoid contamination. Blend thoroughly until color streaks disappear and a uniform color is obtained. To avoid waste, prepare a quantity just enough to be consumed within 1 hr.
C. Method
-
Apply mixed compound with a putty knife or spatula on one or both faces of glue joints.
-
Join surfaces with sufficient pressure to ensure complete contact.
-
Allow to cure or to harden.
-
Unnecessary handling should be avoided until cure is complete. On its uncured state, scrape off excesses from edges or joints or immediately spread out the mixture on surfaces to be settled, filled or patched.
D. Cleaning
Clean all tools or equipment used while adhesive is still in its uncured state. Use Pioneer Epoxy Reducer or solvents to clean tools and spills.