Mighty Bond Anti-Clog Tech
Precision application, flowback action, longer storage life
Description​
Mighty Bond Anti-Clog Tech is an advanced cyanoacrylate adhesive that bonds almost everything in just seconds. It is an extremely fast-drying adhesive and does not need mixing, clamping, or heating. All you need is a drop for every square inch, applied on one side of the two surfaces to be bonded. Mighty Bond Anti-Clog Tech utilizes a patented dispenser to deliver Mighty Bond Instant Glue via a precision applicator and a flow-back mechanism. This dispenser provides accurate application and the flow-back action of the tube reduces nozzle clogging, helping to extend the storage life of your Mighty Bond product.
Packaging
3g tube
​​
​​Applications
Mighty Bond provides an immediate and exceptionally strong bond on almost all materials, including:
• Metal
• Rubber
• Leather
• Wood
• Porcelain
• Some Plastics (except Polypropylene and Polyethylene)
Available in stores and online
Directions for use
A. Surface Preparation
Make sure the surfaces to be bonded are clean and dry (preferable to solvent-wipe plastics, glass, and rubber, and to acid-treat metals).
​
B. Method
-
Pierce the tube by screwing the nozzle down tightly and turning it clockwise.
-
Remove the cap to use.
-
Squeeze the tube and dispense a drop or drops as required, to one of the surfaces to be bonded. Apply just enough to leave a thin film after compression.
-
Join the surfaces and apply pressure for a few seconds. Good contact is essential. An adequate bond develops in less than 1 minute.
-
Remove excess adhesive from the assembly.
-
After use, wipe excess adhesive from the nozzle, and recap.
Sometimes whitening may occur on the surface of the bonded assembly. This is due to condensation by polymerization. Should this happen, wipe the surfaces with Pioneer Mighty Remover.