Pioneer Non-Sag Epoxy
High performance marine applications. Contains epoxide compound
Description
Pioneer Non-Sag Marine Epoxy is a two-component adhesive with a non-flowing consistency, making it very suitable for adhesive and sealant/gap filler applications in boat building. Its non-sag quality allows it to perform well on vertical or overhead applications with a maximum thickness of ½ inch.
​​​​
Packaging
1/4 pint, 1/2 pint, pint set, quart set, gallon set​​
​​
​​Applications
-
As a Marine adhesive for boat building
-
Repairing or restoration of wooden boats
-
Sealing gaps in wood imperfections and joints
-
May be used as a putty or masilya.
Available in stores and online
Directions for use
A. Surface Preparation
Surface contaminants such as dirt, grease, oil or wax must be removed from areas to be joined. Clean surfaces by sanding, sandblasting or brushing for stronger bonds. Surfaces should be clean and ready for application before the adhesive is mixed.
B. Mixing
Mix equal parts by volume of components A and B. Better to use separate spatulas (or spoon) to avoid contamination. Blend thoroughly until color streaks disappear and a uniform color is obtained. To avoid waste, prepare a quantity just enough to be consumed within 1 hr.
C. Method
-
Apply mixed compound with a putty knife or spatula on one or both faces of glue joints.
-
Join surfaces with sufficient pressure to ensure complete contact.
-
Allow to cure or to harden.
-
Unnecessary handling should be avoided until cure is complete. On its uncured state, scrape off excesses from edges or joints or immediately spread out the mixture on surfaces to be settled, filled or patched.
D. Cleaning
Clean all tools or equipment used while adhesive is still in its uncured state. Use Pioneer Epoxy Reducer or solvents to clean tools and spills.